Skip to content
aYOUne
Not in your language

This page is not yet available in en. You're reading the de version.

iot

Stand: Commit 5490222 · 2026-09-27

Mit dem Bereich IoT koppeln Sie Geräte Ihres Unternehmens per QR-Code, prüfen ihren Zustand und verfolgen Kennzeichen-Erkennungen an Zufahrten.

Funktionen

  • Ein Gerät koppeln – Den QR-Code eines neuen Geräts scannen und das Gerät einer Fläche zuweisen.
  • Mikrocontroller-Geräte im Blick – Stand der Mikrocontroller-Geräte und ihrer Firmware ansehen.
  • Kennzeichen und Zufahrten – Kennzeichen in die Positivliste eintragen, Erkennungen und gewährte Zufahrten nachsehen.

Was Sie hier tun

Im Bereich IoT verbinden Sie die Geräte Ihres Unternehmens mit der Plattform: Steuertafeln, Wandanzeigen, Terminals, Werbeflächen und Sensoren. Sie sehen außerdem, welche Kennzeichen an Ihren Zufahrten erkannt wurden und wer einfahren durfte.

Häufige Fragen

Der QR-Code lässt sich nicht einlösen. Ihnen fehlt vermutlich das Recht, Geräte zu koppeln. Wenden Sie sich an Ihren Administrator. Starten Sie das Gerät danach neu, damit es einen frischen Code zeigt.

Das Gerät zeigt nach der Kopplung keine Inhalte. Prüfen Sie, ob Sie die richtige Fläche gewählt haben. Hilft das nicht, setzt Ihr Administrator das Gerät zurück, und Sie koppeln es erneut.

Ein Gerät steht auf „Offline“. Das Gerät hat keine Verbindung. Prüfen Sie Strom und Netzwerk am Standort. Sobald es wieder erreichbar ist, wechselt die Anzeige auf „Online“.

Ein Kennzeichen wurde erkannt, die Schranke blieb aber zu. Der Eintrag gilt nicht für diese Zufahrt oder liegt außerhalb seines Zeitraums. Prüfen Sie Geräte und Zeitraum am Eintrag der Positivliste.

Ein Bereich fehlt in meinem Menü. Ihre Rolle enthält die passende Funktion nicht. Ihr Administrator kann sie freischalten.

Wo Sie es finden

Melden Sie sich in der App Ihres Unternehmens an (zum Beispiel pwa.ayoune.app oder Ihre eigene Plattform-Adresse) und öffnen Sie im Menü den Bereich IoT. Dort finden Sie MCU-Geräte, Firmware-Blueprints, Kennzeichen-Positivliste, Kennzeichen-Erkennungen und das Zufahrts-Protokoll. Welche Einträge Sie sehen, legt Ihr Administrator über Ihre Rolle fest.

Schritt für Schritt: Ein Gerät koppeln

  1. Schalten Sie das neue Gerät ein. Nach dem Start zeigt es einen QR-Code.
  2. Öffnen Sie auf Ihrem Mobiltelefon die App Ihres Unternehmens und scannen Sie den QR-Code.
  3. Wählen Sie das Unternehmen und die Fläche aus, auf der das Gerät arbeiten soll, zum Beispiel eine Steuertafel oder eine Wandanzeige.
  4. Bestätigen Sie. Das Gerät lädt danach das Aussehen Ihres Unternehmens und seine Inhalte. Das dauert in der Regel nur einen Moment.
  5. Soll das Gerät später eine andere Aufgabe übernehmen, weisen Sie es über dieselbe Ansicht einer anderen Fläche zu.

Schritt für Schritt: Mikrocontroller-Geräte im Blick

  1. Öffnen Sie IoT → MCU-Geräte. Die Liste zeigt je Gerät Seriennummer, Typ und ob es Online oder Offline ist.
  2. Klicken Sie auf ein Gerät, um Details zu sehen.
  3. Unter Firmware-Blueprints sehen Sie, welche Firmware für Ihre Geräte vorbereitet ist, und ihren Stand: Entwurf, In Warteschlange, Wird gebaut, Gebaut oder Fehlgeschlagen.

Schritt für Schritt: Kennzeichen und Zufahrten

Ein Kennzeichen freigeben

  1. Öffnen Sie IoT → Kennzeichen-Positivliste und legen Sie einen Eintrag an.
  2. Tragen Sie das Kennzeichen ein. Dieses Feld ist Pflicht.
  3. Ergänzen Sie den Halter (Kunde oder Mitarbeiter), eine Bezeichnung und bei Bedarf den Zeitraum, in dem der Eintrag gilt.
  4. Wählen Sie die Geräte, also die Zufahrten, für die der Eintrag gilt, und speichern Sie.

Erkennungen nachsehen

  1. Unter Kennzeichen-Erkennungen steht jede gemeldete Erkennung mit Zeitpunkt, Zone, Fahrtrichtung und Trefferwert.
  2. Das Zufahrts-Protokoll zeigt nur die Fahrzeuge, die tatsächlich einfahren durften.
  3. Filtern Sie nach Zeitraum, Zone, Ergebnis oder Kamera, im Zufahrts-Protokoll auch nach Kennzeichen und Halter.

Was automatisch passiert

  • Ein gekoppeltes Gerät arbeitet ohne weiteres Zutun. Es meldet regelmäßig seinen Zustand an die Plattform.
  • Ein Gerät macht von Zeit zu Zeit ein Bildschirmfoto. Ihr Administrator sieht darauf, was gerade angezeigt wird.
  • Eine Erkennung an der Zufahrt wird sofort gegen die Positivliste geprüft. Passt ein Eintrag, erscheint die Einfahrt im Zufahrts-Protokoll.

Wo Sie Hilfe bekommen

Weitere Anleitungen finden Sie im Hilfecenter Ihres Unternehmens. Bei fehlenden Rechten, Geräten ohne Verbindung oder Fehlermeldungen hilft Ihnen Ihr Administrator.

Wo Sie das finden

  • iot.iotdeviceblueprints
  • iot.mcudevices
  • iot.plateallowlistentries
  • iot.plateevents
  • iot.plateevents.access

Glossar

  • Kopplung – Die Zuordnung eines neuen Geräts zu Ihrem Unternehmen und zu einer Fläche.
  • Positivliste – Die Liste der Kennzeichen, die an einer Zufahrt Einlass erhalten.
  • Firmware – Die Software, die auf einem Mikrocontroller-Gerät läuft.

Work with this page

Ready-made instructions for your AI tool. Copy, paste, go — the AI fetches the content itself via the address in the text.

Summarise the steps for me The essentials, in the right order.
Read the following documentation by tolinax UG and work with it.

This page: https://ayoune.com/en/docs/hilfe/iot.md
The complete collection: https://ayoune.com/en/docs/hilfe.md

Summarise the content for me.

- First, in two sentences: what is this about?
- Then the steps in the order I need to take them.
- One line per step, in plain language.
- At the end: what I should have ready beforehand.

Leave out nothing I need in order to actually finish.
A note on sources:
- Every page of this documentation is available as Markdown (the same address with `.md`).
- A machine-readable overview of all public content is at `/llms.txt`.
- If you have access to the aYOUne MCP server, you can work against live data
  instead of this snapshot. If not, ignore this point.
Explain what I need this for What it is good for — and when it is worth it.
Read the following documentation by tolinax UG and work with it.

This page: https://ayoune.com/en/docs/hilfe/iot.md
The complete collection: https://ayoune.com/en/docs/hilfe.md

Explain to me what I need this for.

1. Which problem does it solve? In one sentence, from my point of view.
2. Three typical situations in which it genuinely helps me.
3. When I do NOT need it — that saves me time.
4. What I can do instead if it is not a fit.

Stick to what the source says. Where it gives nothing, say so openly instead
of guessing.
A note on sources:
- Every page of this documentation is available as Markdown (the same address with `.md`).
- A machine-readable overview of all public content is at `/llms.txt`.
- If you have access to the aYOUne MCP server, you can work against live data
  instead of this snapshot. If not, ignore this point.
Help me set this up Step by step, asking me as you go.
Read the following documentation by tolinax UG and work with it.

This page: https://ayoune.com/en/docs/hilfe/iot.md
The complete collection: https://ayoune.com/en/docs/hilfe.md

Walk me through the setup step by step.

- First tell me what I need to have ready (access, data, time).
- Then take me through ONE step at a time. Wait for my "next".
- For each step, say how I can tell that it worked.
- If something goes wrong, ask me for the exact message instead of guessing.

If the instructions leave a point open, tell me so rather than inventing it.
A note on sources:
- Every page of this documentation is available as Markdown (the same address with `.md`).
- A machine-readable overview of all public content is at `/llms.txt`.
- If you have access to the aYOUne MCP server, you can work against live data
  instead of this snapshot. If not, ignore this point.
Help me with a problem Narrow down the cause instead of guessing.
Read the following documentation by tolinax UG and work with it.

This page: https://ayoune.com/en/docs/hilfe/iot.md
The complete collection: https://ayoune.com/en/docs/hilfe.md

Help me narrow down a problem.

- First ask me what I observe and what I expected instead.
- From that, derive the most likely causes consistent with this source.
- For each cause, give me ONE test that confirms or rules it out.
- Order them so the cheapest test comes first.

Do not guess. If the source does not cover the problem, tell me where I should
look next.
A note on sources:
- Every page of this documentation is available as Markdown (the same address with `.md`).
- A machine-readable overview of all public content is at `/llms.txt`.
- If you have access to the aYOUne MCP server, you can work against live data
  instead of this snapshot. If not, ignore this point.
Explain it in plain words No jargon, from the ground up.
Read the following documentation by tolinax UG and work with it.

This page: https://ayoune.com/en/docs/hilfe/iot.md
The complete collection: https://ayoune.com/en/docs/hilfe.md

Explain the content so that someone without prior knowledge understands it.

- Start with the purpose: why does this exist at all?
- Explain technical terms in half a sentence on first use.
- One everyday comparison where it genuinely holds — none where it limps.
- At the end: the three things worth remembering.

Do not shorten by dropping conditions. A simplification that hides a
prerequisite is a false statement.
A note on sources:
- Every page of this documentation is available as Markdown (the same address with `.md`).
- A machine-readable overview of all public content is at `/llms.txt`.
- If you have access to the aYOUne MCP server, you can work against live data
  instead of this snapshot. If not, ignore this point.
A checklist to tick off To follow along while you do it.
Read the following documentation by tolinax UG and work with it.

This page: https://ayoune.com/en/docs/hilfe/iot.md
The complete collection: https://ayoune.com/en/docs/hilfe.md

Turn this into a **tick-off checklist** for practical use.

- Exactly one action per item, in the imperative.
- Order it so that no item depends on a later prerequisite.
- Prerequisites and pitfalls as indented sub-items.
- End with an acceptance step: how do I know everything is right?
A note on sources:
- Every page of this documentation is available as Markdown (the same address with `.md`).
- A machine-readable overview of all public content is at `/llms.txt`.
- If you have access to the aYOUne MCP server, you can work against live data
  instead of this snapshot. If not, ignore this point.

Was this article helpful?

👎 No (0)
Leave a comment